为毛
回顾
- Python + Qt for Leo
  - Python
    - Pyenv+VirtualEnv
  - Qt for Leo
- 伟光大的 sshfs
Changelog

为毛¶

得承认是被老池的文章忽悠到了, 而且, 10.9 免费了, 进一步的通过OS 提高了电池/内存的使用效率, 最关键的,在无责任报道~ECUG2013Con 中提及过的, 有好基友,已经折腾过,明确从 10.7 直升没有问题!

于是一个月黑风高的晚上...

回顾¶

宏观上没有想象的复杂,因为真心作到了零配置! 几乎所有非第三方的配置,都继承了下来不用折腾!

唯三的折腾:

Python 环境
Qt 环境
sshfs

严正推荐:

Mavericksでbrew upgradeしたらハマった話

等等日文的相关纪要非常实在,直觉,顺序合理,值得,多参考.

Python + Qt for Leo¶

大家知道俺是文学化编程的拥趸, 所以,一直使用 Leo 作为主要编程环境的,

10.9 以后 Python 不内置安装了, Qt 当然从来也没有内置过. 所以,

Python¶

当然,系统的用 brew install python 了,

而其它各种项目开发时,就要综合使用

Pyenv+VirtualEnv¶

Pyenv 是这样一种神器:

完全的面向shell 通过环境变量的自动配置形成复合Python版本共存

VirtualEnv 有 Pyenv 的插件所以,可以利用已安装好的环境,快速复制出项目专用的, 结果,引发了滥用,特别舒服的那种:

$ pyenv versions
* system (set by /Users/zoomq/.pyenv/version)
  2.7.3
  2.7.5
  2.7.6
  273SAE
  275lbTC
  275pelican
  276SphinxOBP
  276chaos
  276uliweb
  3.2
  3.3.2
  32IPy
  ipynotebook
  pypy-2.2.1
  pypy221chaos

主要遇到的问题是:

==> Installing python3
==> Downloading http://python.org/ftp/python/3.3.3/Python-3.3.3.tar.bz2
######################################################################## 100.0%
==> ./configure --prefix=/usr/local/Cellar/python3/3.3.3 --enable-ipv6 --datarootdir=/usr/local/Cellar/python3/3.3.3/share --datadir=/usr/lo
==> make
==> make install PYTHONAPPSDIR=/usr/local/Cellar/python3/3.3.3
==> make frameworkinstallextras PYTHONAPPSDIR=/usr/local/Cellar/python3/3.3.3/share/python3
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list
Error in sitecustomize; set PYTHONVERBOSE for traceback:
ValueError: list.remove(x): x not in list

指定具体版本,尝试,直到可以顺利安装出可用的就好.

严正表扬一下 'Yamashita, Yuu`

How to config pyenv's pip ? · Issue #95 · yyuu/pyenv
绝对认真的回答了俺的提问,虽然不了了之,但是,一个常用工具的作者,可以如此关注一个不是问题的问题,实在太勤勉了,必须学习!

Qt for Leo¶

参考:

以及:

$ brew install pyqt
==> Downloading http://downloads.sf.net/project/pyqt/PyQt4/PyQt-4.10.3/PyQt-mac-gpl-4.10.3.tar.gz
Already downloaded: /Library/Caches/Homebrew/pyqt-4.10.3.tar.gz
==> Patching
patching file configure.py
==> /usr/local/opt/python/bin/python2 configure.py --confirm-license --bindir=/usr/local/Cellar/pyqt/4.10.3/bin --destdir=/usr/local/Cellar/
Error: Unable to find the qmake configuration file
/usr/local/Cellar/qt/4.8.5/mkspecs/unsupported/macx-clang-libc++/qmake.conf.
Use the QMAKESPEC environment variable to specify the correct platform.
Determining the layout of your Qt installation...

READ THIS: https://github.com/Homebrew/homebrew/wiki/troubleshooting

多多 Google 吧,很标准的环境驱动, Qt 官方提供了的,

然后, Leo 只是一堆 Py 脚本下载下来, 修订一下别名指向就好:

# ~/.bashrc for running Leo
alias leolanch="python /opt/bin/leo/launchLeo.py >> /dev/null 2>&1 &"

伟光大的 sshfs¶

$ brew link fuse4x
Linking /usr/local/Cellar/fuse4x/0.9.2... Warning: Could not link fuse4x. Unlinking...

Error: Could not symlink file: /usr/local/Cellar/fuse4x/0.9.2/lib/pkgconfig/fuse.pc
Target /usr/local/lib/pkgconfig/fuse.pc already exists. You may need to delete it.
To force the link and overwrite all other conflicting files, do:
  brew link --overwrite formula_name

To list all files that would be deleted:
  brew link --overwrite --dry-run formula_name

zoomq @ MBP111216ZQ in /usr/local/lib
$ brew link --overwrite fuse4x
Linking /usr/local/Cellar/fuse4x/0.9.2... 7 symlinks created


$ brew install osxfuse
==> Downloading https://downloads.sf.net/project/machomebrew/Bottles/osxfuse-2.6.2.mavericks.bottle.tar.gz
==> Pouring osxfuse-2.6.2.mavericks.bottle.tar.gz
==> Caveats
If upgrading from a previous version of osxfuse, the previous kernel extension
will need to be unloaded before installing the new version. First, check that
no FUSE-based file systems are running:

  mount -t osxfusefs

Unmount all FUSE file systems and then unload the kernel extension:

  sudo kextunload -b com.github.osxfuse.filesystems.osxfusefs

The new osxfuse file system bundle needs to be installed by the root user:

  sudo /bin/cp -RfX /usr/local/Cellar/osxfuse/2.6.2/Library/Filesystems/osxfusefs.fs /Library/Filesystems
  sudo chmod +s /Library/Filesystems/osxfusefs.fs/Support/load_osxfusefs
==> Summary
🍺  /usr/local/Cellar/osxfuse/2.6.2: 84 files, 5.0M

具体哪个管用,俺也没整明白, 反正,怎么折腾, 都是可以正当加载上 Plan 的内核库, 然后就可以对家庭服务器的所有硬盘,远程加载为本地目录了..

Changelog¶

140616 再次精简,算是发布
140505 快速简述完成
140110 起意,总结

from Lion jump into Mavericks

为毛¶

回顾¶

Python + Qt for Leo¶

Python¶

Pyenv+VirtualEnv¶

Qt for Leo¶

伟光大的 sshfs¶

Changelog¶

Comments

大妈的多重宇宙 - YouTube

任何问题